Spigot pipes - S range

PAM SMU / ENSIGN® S

Products identification

According to standard EN 877, pipes, fittings and accessories as well as the couplings or clamping components and the
gaskets shall be legibly and indelibly marked and shall bear at least the following information:

  • the manufacturer's name or mark
  • the identification of the production site
  • the period of manufacturing, coded or not
  • the reference to this European standard
  • the DN, or DNs where applicable
  • the design angle of fittings
  • the identification of the accredited third party where applicable

In the case of pipes the above markings shall be applied at least once per metre length.

PAM SMU / ENSIGN® S
PAM SMU / ENSIGN® S
PAM SMU / ENSIGN® S

EXTREM 1 one component touch up paint

Where pipes are cut on site, ends shall be cut clean and square with burrs removed and then re-coated with the touch-up paint EXTREM 1-available in 250 and 500 ml tubs equipped with a brush applicator cap.

Red colour acrylic resin, easy application, quick drying.

Chemical resistance, fit for both S and Plus ranges.