Connectors

PAM SMU / ENSIGN®

Use with a PAM-SMU® Rapid 2 or a PAM CV-CE.

PAM SMU / ENSIGN®
PAM SMU / ENSIGN®
PAM SMU / ENSIGN®

Transitional connectors DN 50- 125 are devoted to connecting cast iron ranges S and Plus to other materials, be they steel or plastic.

The connections with these flexible connectors are easy and safe: one pre-cut lid and a lip seal inside (see figure).

EPDM and hose clamp made of chrome steel n° 1.4016

PAM SMU / ENSIGN®

To connect up to three pipes, 32-56 mm made of other waste materials to a cast iron pipe system DN 100.

EPDM and hose clamp made of chrome steel n° 1.4016

PAM SMU / ENSIGN®

The PAM Multiquick connector DN 100x70 allows connections between other waste materials, with outside diameter ranking from 72 to 110 mm, to our cast iron range DN 100 with a maximum outside diameter of 115 mm.

Several pre-cut options.

EPDM and hose clamp made of chrome steel n° 1.4016